Skip to main content

Nixon Renovations LLC

How much does a deck cost in Williamson County, TN? (2026 price guide)

By Nixon Renovations LLC · Spring Hill, TN · Updated October 31, 2026

Deck cost in Williamson County, TN starts with two national benchmarks. Cost vs Value 2025 puts a 16 by 20 foot wood deck at $18,263 and a composite deck at $25,096, or about $57 and $78 per square foot. Height, stairs, railings, footings, roofs, hot tubs and sloped lots move your price up or down from there. A free site visit and written quote give you the real number.

We’ve built decks in Franklin, Spring Hill, Thompsons Station and Columbia since 2002, and the first question on almost every call is the same: what’s this going to run me? This guide answers it with published numbers, the local permit rules that change the price, and what a fair written quote should list. We don’t post a price list, because two 320 square foot decks on two different lots can land thousands of dollars apart.

Backyard deck built by Nixon Renovations, an example of deck cost in Williamson County, TN
A Nixon Renovations deck project. More builds are in our project gallery.

How much does a deck cost in Williamson County, TN in 2026?

The best published benchmark is the Cost vs Value 2025 report from Zonda and the Journal of Light Construction. It prices a 16 by 20 foot deck addition at $18,263 in wood and $25,096 in composite, as national averages. Williamson County jobs start from those figures and move with your site and design.

Here’s how the two report projects compare. The per-square-foot column is our own arithmetic: the job cost divided by the report’s 320 square feet.

Cost vs Value 2025 projectJob costCost per sq ft (our math)Resale valueCost recouped
Wood deck addition, 16 by 20 ft$18,263About $57$17,32395%
Composite deck addition, 16 by 20 ft$25,096About $78$22,19989%

The report doesn’t break the numbers out by county, so treat them as a starting line. A ground-level deck on a flat Spring Hill lot can come in under them. A second-story deck on a Franklin hillside with a roof and two sets of stairs will come in over. If you want the resale side of the story, our post on whether a deck adds value to a Franklin home goes through the 95% and 89% figures in more detail.

What does a deck cost per square foot in Tennessee?

Using the Cost vs Value 2025 numbers, a wood deck works out to about $57 per square foot ($18,263 divided by 320) and a composite deck to about $78 ($25,096 divided by 320). Those are national averages for one deck size. Tennessee jobs often land near them, but your design decides where.

Why the per-foot number shifts with deck size

Some costs barely change with size. A permit, a plot plan, a set of stairs and a ledger board on the house cost about the same on a 12 by 12 deck as on a 16 by 20. Spread those fixed costs over fewer square feet and the per-foot price climbs. On a big deck the same costs get spread thin, so the per-foot price drops. That’s why a small landing deck can quote higher per foot than the $57 benchmark.

Don’t multiply your way to a final price

Homeowners sometimes take $57, multiply by the square footage they want, and treat the answer as a budget. It’s a fine first guess. It won’t account for a 10-foot drop off the back of the house, a hot tub, or an old deck that has to come off first. Use the math to see whether a project is in the right ballpark, then get it measured.

How big is the price gap between wood and composite decking?

On the Cost vs Value 16 by 20 deck, composite costs $6,833 more than wood ($25,096 minus $18,263), which is roughly $21 more per square foot. You get some of it back at sale, though composite recoups 89% of its cost against 95% for wood, according to the same report.

Wood options: pressure-treated pine, cedar and redwood

We build wood decks in pressure-treated pine, cedar and redwood, and the board you pick changes the materials line on your quote. Every wood deck needs need resealing every 2 to 3 years to hold up in Middle Tennessee, where NOAA’s Nashville normals show July highs around 91°F and about 50 inches of rain a year.

Composite options: Trex and TimberTech

Our composite decks use Trex and TimberTech boards. The higher upfront price buys you a deck you clean with soap and water instead of sanding and sealing. For a full side-by-side, read composite vs wood decking in Middle Tennessee. If you’re leaning composite in Spring Hill, ask for both materials priced on the same quote so you see the exact gap for your deck.

Deck project by Nixon Renovations in Spring Hill, TN
Recent work from Nixon Renovations in Middle Tennessee.

What pushes the cost to build a deck in Franklin, TN higher?

In Franklin and across Williamson County, the price climbs with height, stairs, railings, footings, roofs, hot tubs, demolition of an old deck and slope. Each one adds material, labor or engineering. Several of them are written straight into the City of Franklin and City of Spring Hill deck rules, so they aren’t optional.

Height and guardrails

Once a deck sits more than 30 inches above grade, it needs guardrails. Here’s a local difference worth knowing: Franklin’s Deck Construction handout lists a 36-inch minimum guard height, while Spring Hill’s Deck Permit Construction Checklist shows 42 inches. Both use the 4-inch sphere rule, meaning a 4-inch ball can’t pass between spindles. Taller decks also need longer posts and more bracing, so height raises the cost twice: once in the frame and again in the railing.

Stairs and handrails

Stairs are one of the bigger line items on a raised deck. Franklin’s handout caps each rise at 7 3/4 inches with treads at least 10 inches deep, and every step has to match. More than 3 risers means a graspable handrail 34 to 38 inches above the tread nosing. Spring Hill’s checklist requires a handrail on stairs with four or more risers, round rails 1.25 to 2 inches in diameter. A deck 8 feet up needs a lot of steps to meet those numbers.

Footings, the ledger and the permit drawings

Franklin requires footings at least 16 by 16 inches with at least 8 inches of concrete under each post, dug down to undisturbed soil, and the city inspects the pier holes before the concrete goes in. A deck can’t be fastened to brick veneer either. It has to attach to the structural framing of the house, which takes more work on a brick home.

Spring Hill asks for construction drawings showing footing locations, depth and size, joist size and spacing, post and beam sizes, the post-to-beam and post-to-footing connections, and the ledger attachment with flashing. Someone has to produce those drawings, and that time is part of your price. We cover the paperwork in deck permits in Franklin, Spring Hill and Columbia.

Roofs and covers

A roof turns a deck into a much bigger build. HomeAdvisor lists a standard porch roof at $30 to $160 per square foot on top of the deck itself. Franklin’s handout also says decks with roofs must meet setback rules, so a covered deck needs more room from your property line. If you want shade, our porch installation page covers open, covered and screened options.

Hot tubs and swim spas

Spring Hill’s checklist requires engineering when a hot tub or swim spa will sit on the deck. A filled tub is a heavy, concentrated load, and the framing and footings under it get sized to match. Tell your builder about a tub at the first visit. Adding one after the frame is designed means redoing the plan.

Tearing out an old deck

If an old deck has to come off first, demolition and haul-away go on the quote. NADRA, the North American Deck and Railing Association, notes that some older decks are attached to the house with nails only instead of today’s lateral tension hardware. We check the ledger area once the old boards are up.

Sloped lots

A lot of yards in Franklin and Thompsons Station fall away from the house. A sloped lot means the same deck sits higher at the far edge, with taller posts, deeper bracing, guardrails on more sides and often more stairs. Two identical 16 by 20 decks can be priced far apart because one sits on flat ground and the other hangs over a hill.

What does Angi’s Spring Hill data say about deck prices?

Angi’s Spring Hill, TN cost page lists an average of $7,752 and a typical range of $4,500 to $8,775 for deck or porch build and replace jobs requested on its platform. That’s well under the Cost vs Value benchmarks, and the reason is the mix of jobs behind it.

Those Angi requests skew toward small jobs, and the category mixes porch work in with decks. At the $57 per square foot wood benchmark, $7,752 covers roughly 136 square feet of new deck (our math), about the size of a small landing. So if a neighbor tells you decks in Spring Hill cost $7,000, they may be talking about a very different project than the one you have in mind.

How should I budget by deck size?

Budget in tiers, not with one magic number. A small ground-level deck, a mid-size family deck near the 16 by 20 benchmark and a large or multi-level deck each carry different costs. We won’t put dollar figures on the tiers, since your lot decides them, but here’s what moves each one.

Small landing and ground-level decks

A small deck off a back door, low to the ground, usually skips guardrails if it stays under 30 inches. It still needs a permit and proper footings. Because the fixed costs don’t shrink much, the per-foot price runs higher than on a large deck. Angi’s Spring Hill range is most useful here.

Mid-size decks near 16 by 20

This is the size the Cost vs Value report prices: 16 by 20 feet, or 320 square feet. Use the $18,263 wood and $25,096 composite figures as your reference. Then adjust for height, stairs and the brick-veneer rule if your house is brick.

Large, raised and multi-level decks

Big decks, decks over a walkout basement and decks with multiple levels add framing, footings, railing and stairs. Many also include a roof, a hot tub or an outdoor kitchen, each priced as its own line. Our custom decks page shows the kinds of designs that land in this tier.

Custom deck by Nixon Renovations in Franklin, TN
One of our projects in Williamson County. Browse the gallery for more.

What’s included in a Nixon Renovations written quote?

Every Nixon Renovations quote follows a free in-home consultation where we measure the site and talk through the design. You get a detailed written quote covering the deck size, materials, framing, railings, stairs, footings and permit handling. Nothing is priced from a phone call alone.

Our process runs in four steps: consultation and measurements, design and planning, construction, and a final walkthrough with care guidance. We handle permits, inspections and approvals, and every deck meets Tennessee state and local codes. At the end you get a simple maintenance guide. One customer described the planning conversation this way:

“John walked me through the timeline of the project and informed me of process suchs as premitting, workforce availability, and material availability.”

Bill Sherry, Google review

Ready to see your own number? Request a free estimate or call 931-616-1524. We work across Williamson County, plus Columbia and the rest of Maury County, and you can read about our deck installation process before we visit.

How do I compare deck bids from different builders?

Compare bids line by line, not by the bottom number. Two quotes can differ by thousands because one includes permits, demolition or composite railings and the other doesn’t. Ask each builder to price the same size, height and material, then check the list below.

  1. Confirm the deck size and height match on every bid.
  2. Check the decking and railing material on each, by brand where it’s composite.
  3. Ask how many footings are planned and how big they are. Franklin’s minimum is 16 by 16 inches.
  4. Ask how the deck attaches to the house, especially on brick veneer.
  5. Make sure the guard height matches your city: 36 inches in Franklin’s handout, 42 inches on Spring Hill’s checklist.
  6. See whether the quote includes the permit, plot plan and drawings.
  7. Look for demolition and haul-away if an old deck is coming off.
  8. Ask for a start window and a build length in writing.
  9. Confirm the builder is licensed and insured in Tennessee.

A low bid that leaves out the permit or skips the pier-hole inspection is going to cost you later. Franklin inspects pier holes before concrete is poured, and a builder who doesn’t plan for that step either isn’t pulling a permit or hasn’t built there much.

How long does it take to build a deck in Middle Tennessee?

Most of our decks take one to two weeks to build. Larger or more detailed designs can run one to three weeks depending on size. That’s construction time. The permit has to be issued first, and inspections such as Franklin’s pier-hole check happen during the build.

Weather plays a part too. NOAA’s Nashville normals show May as the wettest month and October as the driest, which matters when footings are being dug and concrete poured.

“John, rebuilt our old worn out deck. The design, craftsmanship, and materials used were excellent.”

Thomas Smith, Google review

We serve Franklin, Spring Hill, Thompsons Station, Columbia, College Grove, Mount Pleasant, Nashville and Belle Meade. Browse finished work in our project gallery.

Deck built by Nixon Renovations in Thompsons Station, TN
A finished Nixon Renovations project in Middle Tennessee.

Get a written deck quote for your Williamson County home

Nixon Renovations has built decks since 2002 and gives free estimates across Williamson, Maury and Davidson counties. We’ll measure your yard and price wood and composite side by side.

Request a free estimate
Call 931-616-1524

Frequently asked questions

How much does a 16 by 20 deck cost in Williamson County?

Cost vs Value 2025 puts a 16 by 20 foot wood deck at $18,263 and a composite deck of the same size at $25,096, both national averages. Your number in Franklin or Spring Hill depends on height, stairs, railings, footings and whether the lot slopes. A written quote after a site visit gives you the real figure.

What is the average deck cost per square foot in Tennessee?

Dividing the Cost vs Value 2025 job costs by the report’s 320 square foot deck gives about $57 per square foot for wood and about $78 for composite. Those are national averages. Small decks usually run higher per foot, because stairs, permits and setup cost about the same no matter how big the deck is.

Is a composite deck worth the extra cost in Spring Hill?

Composite costs about $6,833 more than wood on the Cost vs Value 16 by 20 deck. In return, you wash it with soap and water instead of resealing every 2 to 3 years. Wood recoups 95% of its cost at resale and composite 89%, so the choice comes down to upkeep and how long you’ll stay.

Do I need a permit to build a deck in Franklin or Spring Hill?

Yes. Franklin requires a building permit before any work starts, plus a plot plan showing the deck on your lot. Spring Hill’s Deck Permit Construction Checklist asks for a plot plan and construction drawings. Nixon Renovations handles the permits, inspections and approvals as part of the job.

Why did my deck quote come in higher than the Angi average?

Angi lists a $7,752 average for Spring Hill deck or porch jobs, but those requests skew toward small projects and repairs. A new deck with stairs, guardrails, a roof or hot tub engineering is a bigger job. Compare your quote against its square footage and features, not against a platform average.

How long does it take to build a deck in Williamson County?

Most Nixon Renovations decks take one to two weeks to build, and larger or more detailed designs can run up to three weeks. The permit has to be issued before work starts, and in Franklin the city inspects the pier holes before concrete goes in, so plan for that step too.

What should a written deck quote include?

A good quote lists deck size and height, decking and railing materials, footing count and size, stairs, demolition of any old deck, permit handling and the expected schedule. Nixon Renovations gives a detailed written quote after a free in-home consultation and measurements, so you can line it up against other bids item by item.

Sources

author avatar
whiteseolab.com@gmail.com