Fence installation in Williamson County, TN: costs, height rules and HOA questions to settle first
By Nixon Renovations LLC · Spring Hill, TN · Updated October 31, 2026
Fence installation in Williamson County, TN usually runs $20 to $50 per linear foot for wood and $30 to $60 for vinyl, based on HomeAdvisor’s 2025 numbers, so a 150-foot vinyl fence averages about $6,750. In Franklin, the zoning ordinance caps front-yard fences at 3 feet and side and rear fences at 7 feet. Check your HOA covenants and plat, and call 811 before anyone digs.
We’re Nixon Renovations, a Spring Hill contractor that has built decks and outdoor spaces since 2002, and fence installation is part of that work. Most fence calls start with two questions: what will it cost, and what am I allowed to build? Below are the published numbers, the Franklin rules, and the HOA, survey and utility checks to finish first.

How much does fence installation cost in Williamson County, TN?
HomeAdvisor’s 2025 fence cost guide puts installed prices between $9 and $85 per linear foot, depending on material. Chain-link sits at the bottom, aluminum and composite reach the top, and wood and vinyl land in the middle. Your final number depends on the length of the run, the number of gates, the slope of the yard and the fence height.
Here’s the HomeAdvisor table, plus our own arithmetic for a 150-foot run so you can see what those per-foot numbers turn into on a typical backyard in Spring Hill or Thompsons Station.
| Material | Installed cost per linear foot (HomeAdvisor 2025) | 150-foot run, low to high (our math) |
|---|---|---|
| Chain-link | $9 to $30 | $1,350 to $4,500 |
| Wood | $20 to $50 | $3,000 to $7,500 |
| Vinyl | $30 to $60 | $4,500 to $9,000 (HomeAdvisor average about $6,750) |
| Aluminum | $25 to $75 | $3,750 to $11,250 (HomeAdvisor average about $7,500) |
| Composite | $20 to $85 | $3,000 to $12,750 |
The 150-foot column is simple multiplication, low and high price times 150. It isn’t a quote. Use it to sanity-check what any fence company in Franklin or Spring Hill tells you.
The 150-foot vinyl example
HomeAdvisor says a 150-foot vinyl fence averages about $6,750. Divide that by 150 and you get $45 per foot, right in the middle of the $30 to $60 vinyl range. Vinyl is the material most people mean when they ask about privacy fence cost in Spring Hill, because it comes in solid panels and doesn’t need stain. If your quote lands well above $60 a foot for plain vinyl, ask what’s driving it: extra gates, a steep grade, or taller panels.
The 150-foot aluminum example
A 150-foot aluminum fence averages about $7,500 on HomeAdvisor, which works out to $50 per foot. That’s higher than the vinyl average even though aluminum is an open picket style you can see through. The aluminum range is also the widest in the table ($25 to $75), so two aluminum quotes for the same yard can differ by thousands of dollars based on the panel style and post spacing alone.
Why your number won’t match the table exactly
Per-foot prices assume a straight, fairly level line. Rolling lots in Williamson County often need stepped panels, and every corner adds a post. Ask each contractor whether gates and old fence removal are in the per-foot number or listed separately, so you’re comparing like with like.
How do I measure my fence run and do my own math?
Measure every side of the area you want fenced with a long tape or a measuring wheel, add the lengths, and multiply the total by the low and high per-foot prices for your material. That gives you a working budget range in about twenty minutes, before you call anyone for a quote.
- Sketch your yard on paper, including the house, driveway, deck, patio and any sheds.
- Mark where the fence starts and stops. Many backyard fences tie into the back corners of the house, so the house wall is one side of the enclosure.
- Walk each straight section with a tape or wheel and write the length on your sketch. Round up to the next foot.
- Mark each gate and its width. A walk gate and a wider gate for a mower or trailer are common in Thompsons Station and College Grove yards.
- Add all sections for the total linear feet.
- Multiply the total by the low and high prices from the table for each material you’re considering.
Here’s an example. Say your backyard is 60 feet wide and 45 feet deep, and the fence runs from one back corner of the house, down the side, across the back and up the other side. That’s 45 + 60 + 45 = 150 feet. At wood prices of $20 to $50, that’s $3,000 to $7,500. At vinyl prices, $4,500 to $9,000. Now you know which conversations fit your budget.
We measure the line ourselves at the free consultation, but your sketch tells us where the gates go. If you’d like a pro to measure, our fence installation service starts with an in-home visit and ends with a detailed written quote.
What are the fence height rules in Franklin, TN?
The City of Franklin Zoning Ordinance, Chapter 13, Section 13.1.2, limits residential fences to 3 feet in the front yard and 7 feet in side and rear yards. Board horse fencing in a front yard can reach 4.5 feet. Height is measured from finished grade, and taller fences and walls may need a building permit.
Those fence height rules in Franklin, TN shape the design. A 6-foot privacy fence fits a back or side yard under the 7-foot cap, but it can’t run along the front of the lot. A fence that wraps toward the front has to step down to 3 feet past the front line of the house, or stop at the front corners.
Measured from finished grade
“Finished grade” means the ground level after grading is done. On a sloped lot, stepped panels sit taller on the low side of each step, so check the downhill end of each section against the limit too.
When a permit comes into play
The Franklin ordinance says fences and walls may need a building permit depending on height. Before you settle on a design, call Franklin’s Building and Neighborhood Services at 615-794-7012 and ask whether your planned height needs one. Outside city limits, unincorporated Williamson County goes through Williamson County Building and Codes at 1320 West Main Street in Franklin. In Spring Hill, Columbia or another town, check with that city’s office, because Franklin’s numbers only apply inside Franklin.
We handle permits for the decks we build, and we follow the same habit on fences: confirm the rules for your address before materials get ordered. You can read how that works for decks in our post on deck permits in Franklin, Spring Hill and Columbia, and see our Franklin, TN page for the work we do there.

What should I check in my HOA covenants before installing a fence?
Read your HOA’s covenants and architectural guidelines before you get quotes, because many Williamson County subdivisions set their own fence rules on top of city zoning. Look for limits on material, height, color and placement, and find out whether the board must approve plans in writing before work starts.
Every HOA writes its rules differently, so we can’t tell you what yours says. These are the questions to answer from the documents before you pay for a design:
- Does the HOA require written approval, and how long does review take?
- Are any materials banned, such as chain-link?
- Is there a height limit lower than the city’s?
- Does the fence have to sit behind the front corner of the house?
- Is there a required color or style?
If the covenants are stricter than the city ordinance, plan to the stricter rule. Send the HOA a site sketch with lengths and the exact material, then wait for written approval before anyone digs.
Look at the plat for easements
Your subdivision plat (the recorded map of your lot) often shows utility or drainage easements along the back and side lines. A fence built inside an easement may have to come down if a utility or the city needs access. Pull the plat from your closing papers or the county register of deeds, find any easement lines, and plan the fence to stay out of them or ask the easement holder before building.
Do I need a survey to find my property line?
If you aren’t certain where your lot lines are, get a survey or find the property pins before setting posts. A fence placed even a foot onto a neighbor’s land can turn into a dispute or a removal. Pins and a recent survey give your contractor a line to work from.
Look first in your closing documents, which often include a survey showing lot dimensions and pin locations. Pins get buried by landscaping, and a metal detector near the expected corners sometimes finds them. If they’re missing, hire a licensed surveyor to mark the corners again.
Some homeowners set the fence a little inside the line on purpose, which leaves room to maintain the outside face. Either way, talk to your neighbor about the line and which side faces out before construction.
Why should I call 811 before digging fence posts?
Every fence post goes into a hole in the ground, and buried gas, power, water and communication lines can run through the same yard. That’s why the rule is simple: call 811 before digging. In Tennessee that call goes to Tennessee 811, and you make it before the first post hole, not after.
If a utility mark lands where a corner post should go, the post moves and the fence line shifts around it. Also tell your contractor about lines you added yourself, such as a sprinkler system, wiring to a lamp post or a buried dog fence, since those are common in Thompsons Station and Spring Hill backyards.
Do pool fences have different rules?
Fences around swimming pools usually have their own barrier requirements, separate from ordinary yard fences. Those can cover height, gate hardware and how far apart pickets sit. Ask your city or county codes office for the pool barrier rules at your address before you choose a style.
We won’t quote pool barrier numbers here, because they depend on your city’s adopted code. Mention the pool in your first call with the codes office and your contractor, so the design starts from the barrier rules.

Want a second set of eyes on your yard before you settle on a design? Request a free estimate or call us at 931-616-1524. We’ll walk the line with you, talk through the height rules for your address, and give you a written quote for the fence installation.
What fence material holds up best in Middle Tennessee weather?
Middle Tennessee is wet and hot. NOAA’s 1991 to 2020 normals for Nashville International Airport show about 50 inches of rain a year and July highs near 91°F. Wood needs sealing to stand up to that, while vinyl and aluminum don’t take stain or sealer. Choose by how much upkeep you’ll actually do.
Wood
Wood is the classic privacy choice at $20 to $50 a foot, and pressure-treated pine and cedar are common picks. The trade-off is upkeep. We tell deck owners to reseal wood every 2 to 3 years, and a wood fence in the same rain and sun benefits from that schedule. May is the wettest month in the NOAA normals, so seal before it.
Vinyl
Vinyl costs $30 to $60 a foot and needs no stain. A hose and mild soap handle most cleaning. It’s the usual answer for homeowners who want a solid privacy fence and don’t want to think about it again for a while.
Aluminum and chain-link
Aluminum ($25 to $75 a foot) gives an open look that keeps a view of the yard, which is why people pick it around patios and for front-yard sections that must stay at 3 feet in Franklin. Chain-link ($9 to $30) is the budget option for keeping pets and kids in. Neither gives privacy on its own.
Composite
Composite fencing runs $20 to $85 a foot on HomeAdvisor. If you already have a composite deck from Trex or TimberTech, a composite fence can carry the same low-upkeep approach out to the property line. Our guide to composite vs wood decking in Middle Tennessee covers the same trade-offs for deck boards.

How do I match a new fence to my deck and patio?
Plan the fence alongside the deck and patio, not after them. Matching materials, lining up gates with paths, and setting fence heights around seating areas makes the whole yard look built at one time. That’s why many Williamson County homeowners fold the fence into a larger backyard renovation.
Run the fence color close to the deck railing color. Put a gate where people already walk, like the bottom of the deck stairs. Use an open section where you want a view from the deck, and full privacy where it faces a neighbor’s windows.
With one crew doing the layout, fence posts don’t land where a future patio or retaining wall will go. Our backyard renovation work regularly combines a fence with deck installation, paver patios and pergolas. If you’re pricing the deck side as well, our post on deck cost in Williamson County uses the same published-number approach as this one.
“One of the best deck builders I have seen – really solid construction and better than most other deck contractors I have had seen. Great warranty, customer service and cares about quality and the details.”
Brian Nelson, Google review
What happens when you hire a fence company in Franklin, TN?
A good fence company in Franklin, TN should measure the yard in person, confirm the height rules and any permit, coordinate the 811 call, and give you a written quote before work starts. At Nixon Renovations, that process follows the same four steps we use on every deck.
First is the in-home consultation, where we walk the line and mark gates and slopes. Second is design and planning: material and height checked against city and HOA rules, then a detailed written quote. Third is construction. Last is a final walkthrough with care guidance for your material.
We’re licensed and insured in Tennessee, and we serve Williamson, Maury and Davidson counties. That includes Franklin, Spring Hill, Thompsons Station, Columbia, College Grove, Mount Pleasant, Nashville and Belle Meade. See the full list on our service areas page, and browse finished work in the project gallery.
“John walked me through the timeline of the project and informed me of process suchs as premitting, workforce availability, and material availability.”
Bill Sherry, Google review
Get a written quote for your new fence
Nixon Renovations has built outdoor spaces since 2002 and gives free estimates across Williamson, Maury and Davidson counties. We’ll measure your fence line, check the height rules for your address and put it all in writing.
Request a free estimate
Call 931-616-1524
Frequently asked questions
How much does a 150-foot fence cost in Williamson County?
HomeAdvisor’s 2025 guide says a 150-foot vinyl fence averages about $6,750 and a 150-foot aluminum fence about $7,500. Using its per-foot ranges, 150 feet of wood works out to $3,000 to $7,500 and chain-link to $1,350 to $4,500. Gates, slope, height and old fence removal move the final price.
How tall can a backyard fence be in Franklin, TN?
The City of Franklin Zoning Ordinance allows fences up to 7 feet in side and rear yards. Front-yard fences are limited to 3 feet, or 4.5 feet for board horse fencing. Height is measured from finished grade. Your HOA may set a lower limit, so check the covenants before choosing a height.
Do I need a permit for a fence in Franklin?
It depends on height. Franklin’s zoning ordinance says fences and walls may need a building permit depending on how tall they are. Call Franklin Building and Neighborhood Services at 615-794-7012 with your planned height and address. Outside Franklin, check with your own city or with Williamson County Building and Codes.
What does privacy fence cost in Spring Hill, TN?
Privacy fences are usually wood or vinyl. HomeAdvisor’s 2025 ranges are $20 to $50 per linear foot for wood and $30 to $60 for vinyl. Multiply your total fence length by those numbers for a budget range, then get a written quote that lists gates and any removal of an old fence separately.
Should I call 811 before installing a fence?
Yes. Call 811 before digging any fence post holes. In Tennessee the call goes to Tennessee 811. Buried gas, power, water and communication lines can run through a backyard, and post holes go straight down into that ground. Also tell your contractor about private lines like sprinklers or lamp post wiring.
Can I build a fence on a utility easement?
Check your subdivision plat first. Easements for utilities or drainage often run along back and side lot lines, and a fence built inside one may have to be removed if the easement holder needs access. Plan the fence to stay out of easements, or ask the easement holder before building.
Which fence material works best in Middle Tennessee?
Middle Tennessee gets about 50 inches of rain a year and July highs near 91°F, per NOAA normals for Nashville. Wood needs resealing every 2 to 3 years to handle that. Vinyl and aluminum need no stain or sealer. Pick the material based on how much upkeep you’ll do.
Sources
- HomeAdvisor, Fence installation cost (2025)
- City of Franklin Zoning Ordinance, Chapter 13, Section 13.1.2
- NOAA 1991 to 2020 climate normals, Nashville International Airport
